Interlink electronic Mouse VersaPoint RF Wireless Keyboard User Manual

• 100-foot range  
• 360° navigation  
• Sleek and elegant  
• 8 address pairs to eliminate interference  
• Compatible with the new RemotePoint RF  
User’s Guide  
Version 1.1  
 
USER’S GUIDE  
1. Introduction.................................................... Page 1  
2. Getting Started ............................................... Page 2  
System Requirements  
Installing the Keyboard Batteries  
Connecting the Receiver  
Selecting an Address  
Positioning the Receiver  
3. Using the Keyboard ....................................... Page 6  
Function (Fn) Key  
Numeric Keypad  
Status Indicators  
Keyboard Range  
Battery Life  
4. Using VersaPoint® Pressure  
Pointing Technology ...................................... Page 9  
Moving the Cursor  
Click Buttons  
5. Troubleshooting ........................................... Page 10  
Appendix A – General Specifications  
Appendix B – Technical Support  
Appendix C – Warranty  
Appendix D – FCC Certification  
Canadian conformance  
 
USER’S GUIDE  
About the  
VersaPointRF®  
Wireless  
Your new VersaPointRF Wireless Keyboard  
combines pointing mouse functionality with touch  
typing, all in a convenient wireless package. It’s  
perfect for relaxed Internet browsing, video  
conferencing, or everyday computing.  
Keyboard  
Included in  
the Box:  
§
§
VersaPointRF Wireless Keyboard  
VersaPointRF Wireless Keyboard receiver with  
6’ cable for USB connection  
§
§
VersaPointRF Wireless Keyboard User’s Guide*  
with tear out Registration Card  
4 – AA alkaline batteries  
Optional  
Equipment  
§
RemotePointRF  
Interlink’s cordless pointing device is the perfect  
companion for your RF keyboard. If your system  
does not include one, contact your dealer today.  
*
If your package includes a CD ROM, the  
User’s Guide is located on the CD  
1
 
VERSAPOINT RF WIRELESS KEYBOARD  
System  
Requirements  
§
§
§
IBM PC compatible computer  
USB port available  
Microsoft Windows 98 or higher  
Installing the  
Keyboard  
Batteries  
1. Turn the keyboard over onto its face.  
2. By pressing the latch tab toward the center of the  
keyboard, pry open the battery door with your  
fingers.  
3. Insert 4 AA alkaline batteries (included) with the  
positive (+) and negative (-) orientation as shown  
inside the compartment (negative is at the flat  
end of the battery and goes toward the spring).  
4. Replace the battery door by ensuring both  
retaining tabs fit into their slots and the latch tab  
snaps into place.  
1. Shut down Windows and turn off your computer.  
Connecting  
the Receiver  
2. Locate an enabled USB port on the back of your  
computer.  
3. Plug the connector on the end of the receiver  
cable into the USB port on your computer.  
4. Start Windows and follow the on-screen instruc-  
tions to enable/install the Windows drivers for  
the USB. keyboard and mouse as needed.  
2
 
USER’S GUIDE  
Selecting an  
Address  
The address on which your keyboard and receiver  
communicate is pre-set at the factory. The factory  
setting is address 1. In most situations this will never  
need adjustment. However, if you are operating  
several RF devices in close proximity, or there are  
interfering sources, you may need to change the  
address from the factory setting. We recommend that  
you first try the system out to be sure that you need to  
change addresses. There are 8 possible addresses to  
choose from. The 8 addresses are selected thru 4  
switches. Both the keyboard and receiver must be set  
to the same address.  
1. Open the battery door on the backside of the key-  
board and remove the batteries. (See “Installing  
the Keyboard Batteries” section on the previous  
page). Notice the  
Changing  
the  
Keyboard  
Address  
cutout hole in the center  
of the battery compart-  
ment, visible once the  
batteries are removed.  
2. Use a small pointed tool  
(such as a pencil) to set  
the switches that are  
located inside the cutout  
hole. Address selection is  
made per the chart below  
(which is labeled inside the battery door cover).  
3
 
VERSAPOINT RF WIRELESS KEYBOARD  
Changing  
the Receiver  
Address  
1. Locate the slot cutout on  
the back of the receiver  
between the antenna and  
the cable. The switches  
can be seen inside the  
cutout slot.  
2. The receiver must be set to the same address as  
the keyboard described above. The switches are  
set in the same way as those on the keyboard  
using the table above.  
Power your computer back on.  
Position the receiver as described in the next section.  
Positioning  
the Receiver  
The receiver is multi-positional and the antenna can  
be articulated. If you are placing it on a table or  
desktop, it is best to stand the antenna up to minimize  
any disruption of the signal by the table or desk.  
When you are mounting or positioning the receiver,  
be careful not to locate the antenna too close to metal  
objects. The keyboard should not be placed too  
close to metal objects.  
4
 
USER’S GUIDE  
1. Point the keyboard in the general direction of the  
receiver.  
Testing the  
Keyboard  
2. Move your finger around on the mouse button.  
The cursor should move on the screen.  
Your new VersaPointRF Wireless Keyboard is now  
ready for use. No special software is required and it  
can be used with your current installed drivers.  
5
 
VERSAPOINT RF WIRELESS KEYBOARD  
The VersaPointRF Wireless Keyboard operates like a  
traditional wired computer keyboard, except that it  
requires no cable to your computer. That is, simply  
point it in the general direction of the receiver and  
type on it. There are, however, a few unique features:  
Function  
(Fn) Key  
The VersaPointRF Wireless Keyboard achieves the  
functionality of 104 keys with only 88 keys within a  
very compact size. To accomplish this, some keys are  
used more than once. The Fn key located at the  
lower left corner of the key matrix and several other  
keys have legends delineated with light blue letters to  
indicate multiple function. For example, when the  
Fn key is depressed followed by the F12 key, Insert  
mode is toggled. This is indicated by the abbrevia-  
tion Ins printed in light blue on the same F12 key.  
Numeric  
Keypad  
Again to save space, the VersaPointRF Wireless  
Keyboard has its numeric keypad built in, using some  
existing keys twice. The numeric keypad is laid out  
on the right side of the keyboard, in a format similar  
to the keypad on a full size keyboard and has the  
keypad functions marked in blue. To activate the  
keypad, simply press the Num Lock key. The  
indicator LED on the receiver will light and the  
marked keys on the right side of the keyboard will  
change to their keypad functions.  
6
 
USER’S GUIDE  
To indicate the status of the Num Lock, Caps Lock  
and Scroll Lock keys, indicator LED’s are built into  
the receiver.  
Status  
Indicators  
Using conventional touchpads in battery powered  
wireless keyboards, it has been an unrealized  
challenge to get adequate range without excessive  
battery consumption. By using Interlink Electronics  
patented VersaPoint mouse technology combined  
with advanced battery conservation methods and  
sleep modes, the VersaPoint RF Wireless Keyboard  
easily achieves excellent range and exceptional  
battery life.  
Keyboard  
Range  
Indoors operating ranges will be up 100’, and, under  
ideal conditions, more than that. Naturally, indi-  
vidual results will vary depending on how you use  
your keyboard.  
Both the keyboard circuitry and the VersaPoint  
mouse make use of the latest advances in low-power  
integrated circuit technology. Both also employ what  
is known as “sleep mode.” When nothing is being  
typed on the keyboard, the radio circuitry and the  
keyboard processor go to “sleep,” consuming a mere  
fraction of their normal power requirements, while  
waiting for the next key press.  
Battery Life  
Under normal usage, battery life of up to 6 months  
will be typical. Again, your results will depend on  
how you use your keyboard.  
7
 
VERSAPOINT RF WIRELESS KEYBOARD  
Battery Life  
continued  
When it finally comes time for battery replacement,  
you may begin to notice a reduction in range, typified  
by lost keys at longer distances. In addition, the low  
battery indicator located above the keys will illumi-  
nate when batteries are approaching the end of life.  
We strongly recommend the use of alkaline batteries  
only. Please remember to dispose of depleted  
batteries properly.  
8
 
USER’S GUIDE  
Moving the Total cursor control is available through the touch of  
Cursor your thumb using the VersaPoint Pressure Pointing  
Technology. Its intuitive and feels natural. Where  
you place your thumb or finger on the soft button and  
apply pressure dictates the direction of cursor move-  
ment. Pressing harder causes the cursor to move  
more quickly. It is easy for many users to place their  
thumb at the center of the button and rock it in the  
direction desired for cursor movement.  
Click Like a normal mouse, the VersaPoint RF Wireless  
Buttons Keyboard has left and right click buttons. These are  
located next to each other on the upper left side of  
the keyboard unit. In addition, two extra left click  
buttons can be found on the forward edge of the unit  
to enable simple index finger actuation.  
9
 
VERSAPOINT RF WIRELESS KEYBOARD  
If you have connected your VersaPointRF Wireless  
Keyboard receiver and are having difficulties, please  
consult these troubleshooting guidelines.  
Keyboard  
Does Not  
Send Keys  
§
§
Check your connections – make sure the receiver  
is securely plugged into your computer’s USB port.  
Assure that the keyboard is pointed generally  
toward the receiver.  
§
§
Install fresh batteries.  
Check to make sure both the receiver and key-  
board are set to the same address.  
§
Check to make sure your USB port is active. If  
not, refresh the USB controller by accessing the  
Device Manager under System Properties.  
Cursor Does  
Not Move  
§
§
Check your connections – make sure the receiver  
is securely plugged into your computer’s USB port.  
Assure that the keyboard is pointed generally  
toward the receiver.  
§
§
Install fresh batteries.  
Try restarting Windows – Windows can be very  
sensitive to its treatment of memory and resources.  
Sometimes restarting and/or powering the com-  
puter off and back on will restore cursor motion.  
Try the receiver on USB port, if available.  
Check to make sure both the receiver and key-  
board are set to the same address.  
§
§
Reduced  
Range or  
Lost Keys at  
Longer  
§
§
§
§
Install fresh batteries.  
Assure nothing is blocking the receiver antenna.  
Relocate the receiver.  
Make sure keyboard and receiver are not close to  
metal objects.  
Ranges  
10  
 
USER’S GUIDE  
Model Number  
Technology:  
VP6210  
Omnidirectional RF  
Number of Keys:  
88 (equal to 104 when  
combined with the Fn Key)  
Carrier Frequency:  
916 MHz  
Effective Operating Range: Up to 100 feet  
(30 meters) typical  
Battery Life:  
Power:  
Up to 6 months typical  
4 - AA alkaline batteries  
6VDC (included)  
Temperature:  
Operating: 32°F to 122°F  
(0°C to 50°C)  
Storage: -4°F to 158°F  
(-20°C to 70°C)  
Keyboard dimensions: 15.3” x 7.0” x 1.7”  
Keyboard weight: 1 lb., 8 oz.  
Receiver dimensions: 3.0” x 3.5” x 1.0”  
Antenna:  
3.9” articulating  
USB  
Receiver connector:  
11  
 
VERSAPOINT RF WIRELESS KEYBOARD  
If you have any difficulties installing or using your  
VersaPoint RF Wireless Keyboard, please re-check  
the Troubleshooting section of this User’s Guide.  
If you are still unable to solve the problem, please  
call our Product Support team for assistance.  
Product Support  
(800) 340-1331  
Hours: 8 am to 5 pm, PST  
Tel: (805) 484-1331  
Fax: (805) 484-8989  
Please have ready the following information:  
§
§
Date and place of purchase  
Brand and model of computer (e.g., IBM PC  
Pentium 1)  
§
Operating software you use with this product  
(Win 2000, etc.)  
12  
 
USER’S GUIDE  
1. What product is covered by this warranty? The following product (“the Product”) is  
covered by this warranty: VersaPointRF Wireless Keyboard.  
2. What does this warranty cover? Interlink Electronics, Inc. (“Interlink”) warrants to  
the original end-user purchaser of the Product (“you”) that the Product will be free from  
defects in materials or workmanship under normal use and service during the warranty  
period described in Paragraphs 3 and 4.  
3. When does your warranty begin? The warranty will begin on the day you purchase  
the Product. Dated proof of purchase is necessary to accompany the Product returned for  
warranty service consideration. Valid proof of purchase must identify the point of  
purchase, date of purchase, and product model or trade name. Ordinarily, your sales  
receipt or invoice will suffice.  
4. How long does the coverage last? The warranty for the Product, excluding Batteries,  
is as follows:  
LIMITED ONE YEAR PARTS AND LABOR  
5. What will Interlink do if the product becomes defective in materials or workman-  
ship during the warranty period? If the Product covered under this warranty becomes  
defective in materials or workmanship during the applicable warranty period,  
INTERLINK will, at its option, either repair the defective Product without charge for  
parts and labor, or provide a replacement in exchange for the defective Product.  
INTERLINK reserves the right to provide, at no additional cost, a more current or  
upgraded model for replacement, if available.  
6. What is not covered by this warranty? (a) This warranty does not extend to: (i)  
Products which have been subjected to misuse, accident, physical damage, improper  
installation, abnormal operation or handling, neglect, inundation or fire, or; (ii) Products  
which have been damaged due to repair, alteration or modifica-tion by anyone other than  
an authorized representative of INTERLINK, or; (iii) Defects caused by components,  
parts, or accessories not compatible with the warranted Product, or; (iv) Products  
whose warranty/quality stickers, product serial number plates or electronic serial  
numbers have been removed, altered or rendered illegible, or; (v) Accessory items. (b)  
ANY OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR  
PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. (c) INTERLINK’S TOTAL LIABILITY FOR DAMAGES FOR ANY  
CAUSE RELATED TO, OR ARISING OUT OF, THE USE OR INABILITY TO USE  
THE PRODUCT, WHETHER IN CONTRACT, NEGLIGENCE, STRICT TORT OR  
BASED ON ANY OTHER LEGAL THEORY, SHALL NOT EXCEED THE ORIGINAL  
PRICE PAID FOR THE PRODUCT. (d) IN NO CASE SHALL INTERLINK BE  
LIABLE FOR ANY INDIRECT SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT,  
13  
 
VERSAPOINT RF WIRELESS KEYBOARD  
NEGLIGENCE, STRICT TORT OR ANY OTHER LEGAL THEORY. SUCH DAM-  
AGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF  
SAVINGS OR REVENUES, INABILITY TO USE THE PRODUCT OR ANY ASSOCI-  
ATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIP-  
MENT, FACILITIES OR SERVICES, CLAIMS BY THIRD PARTIES OTHER THAN  
YOU, AND INJURY TO PROPERTY. SOME STATES DO NOT ALLOW THE EXCLUSION  
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE  
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
7. How do you get warranty service? If your Product requires warranty service, you must first  
contact Product Support to receive an RMA Number. The tele-phone numbers for Product  
Support are (800) 340-1331 and (805) 484-8989. Once you obtain an RMA Number, you  
must return the Product to INTER-LINK, postage prepaid, along with a description of the  
Product malfunction or difficulty and your RMA Number. You must also substantiate warranty  
status with a dated proof of purchase (as explained in paragraph 3), inclusive of Product’s serial  
number: The address where you should send the Product to receive warranty service is:  
Product Support  
INTERLINK ELECTRONICS, INC.  
546 Flynn Road, Camarillo, CA 93012  
RMA Number ____________  
INTERLINK assumes no risk for damage or loss in shipment. If, in INTERLINK’s sole  
opinion, the Product failure is not covered under this warranty you will be notified and an  
authorization will be requested for any further repair activity. Products repaired under warranty  
will be returned to you, transportation prepaid. You must pay return shipping costs for the  
Products repaired which are not covered by warranty or the Products for which you do not wish  
to authorize repairs.  
8. How does state law apply to this warranty? This warranty gives you specific legal rights,  
and you may also have other rights which vary from state to state.  
9. Attorney fees: If any legal actions arises relating to this warranty, the prevailing party shall be  
entitled to recover, in addition to other damages, all court costs, expenses and reasonable  
attorney fees.  
10. This warranty is the entire agreement. Unless modified in writing, signed by both you and  
INTERLINK, this warranty is understood to be the complete and exclusive agreement between  
the parties, superseding all prior agreements, oral or written, and all other communications  
between the parties relating to the subject matter of this warranty. No agent or employee of  
INTERLINK may make modifications to this warranty and any such representations should  
not be relied upon.  
For more information, please contact PRODUCT SUPPORT at  
(800) 340-1331 or (805) 484-8989  
14  
 
USER’S GUIDE  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) This device must accept  
any interference received, including interference that may cause  
undesired operation. This equipment has been tested and found  
to comply with the limits for a CLASS B digital device, pursuant  
to Part 15 of FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference when the  
equipment is operated in a residential installation. This  
equipment generates, uses, and can radiate radio frequency  
energy and if not installed and used in accordance with the  
instruction guide, may cause harmful interference to radio  
communications. However, there is no guarantee that this radio  
interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment on  
and off, the user is encouraged to try to correct the interference  
by one or more of the following measures:  
·
·
·
Re-orient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio-TV technician for  
help.  
·
Notice:  
Any changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s authority  
to operate the equipment. This product is equipped with shielded  
cable. Extension cables, if used, must be shielded in order to  
comply with the emission limits.  
Canadian  
conformance  
This Class B digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
15  
 
546 Flynn Road • Camarillo, CA 93012  
(805) 484-8855 • Fax (805) 484-8989  
 

Ingersoll Rand Impact Driver 115 User Manual
Init TV Video Accessories NT C3012 User Manual
Intel Computer Hardware 9EJL4 User Manual
Intel Stereo Amplifier ReValver MK III User Manual
IOGear Switch GUB211 User Manual
Kambrook Iron KI400 User Manual
Kenmore Vacuum Cleaner 11628615 User Manual
Kenwood CD Player CD 3280M User Manual
Kicker Car Amplifier DXA 2504 User Manual
KitchenAid Ventilation Hood KIRD801V User Manual