JVC MP3 Player KT SR2000 User Manual

SIRIUS® Radio  
KT-SR2000  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bot-  
tom or side of the cabinet. Retain this  
information for future reference.  
INSTRUCTIONS  
Model No.  
Serial No.  
LVT1261-001A  
[J]  
 
CONGRATULATIONS!  
Your new JVC SIRIUS® Radio KT-SR2000, called “JVC Plug-In–Play (PnP),” lets you enjoy SIRIUS Satellite  
Radio’s digital entertainment streams anywhere you’ve installed either KS-K6012 Car Docking Kit or  
KS-K6013 Home Docking Kit (sold separately). Use this manual to familiarize yourself with all of JVC PnP’s  
features and capabilities.  
For the latest information about this and other JVC PnP products, visit the JVC Web site at  
<http://www.jvcmobile.com>.  
Table of Contents  
Safety Precautions ......................................................4 Menu Options Settings .............................................22  
Box Contents ..............................................................5  
Installation: Preparation..............................................6  
Installation in Your Car with KS-K6012 ....................7  
Installation in a Home with KS-K6013 ....................11  
JVC PnP’s Controls and Features .............................12  
Activating your SIRIUS Subscription ...................... 14  
Basic Operation ........................................................15  
Selecting Music .................................................16  
Direct Tuning .....................................................17  
Presetting the Desired Streams .......................... 17  
Enlarging the Indications—Display Button ...... 19  
S-Seek Function—Memory Button ................... 20  
Basic Setting Procedure .....................................23  
1 Sirius ID ........................................................23  
2 Display Settings ............................................23  
3 Confirm Tone Options .................................. 24  
4 FM Transmitter Options ...............................24  
5 Add or Skip ...................................................25  
6 Lock Options ................................................25  
7 Audio Level Options .....................................26  
8 Antenna Aiming ............................................27  
9 Memory Options ...........................................27  
0 Time Based Features .....................................28  
- Factory Default .............................................30  
Specifications ...........................................................31  
Troubleshooting ........................................................31  
3
 
Safety Precautions  
WARNINGS:  
WARNINGS:  
Take the following precautions to prevent fire and  
avoid personal injury:  
Take the following precautions to prevent traffic  
accidents and avoid personal injury:  
• To avoid short circuits, never put or leave any  
metallic objects (coins, tools, etc.) inside the unit.  
• If the unit emits smoke or strange smells, turn the  
power off immediately and consult your dealer.  
• Do not drop the unit or subject it to strong shocks.  
• If the LCD display becomes damaged or broken, do  
not touch the liquid crystal fluid. The fluid may be  
dangerous to your health or even fatal. If the liquid  
crystal fluid contacts your body or clothing,  
immediately wash it off with soap and water.  
• Installation must be performed according to this  
instruction manual. JVC is not responsible for  
issues arising from installations not performed  
according to the procedures in this manual.  
• Do not install the unit where it may obstruct your  
view through the windshield or of your vehicle’s  
indicator displays.  
• Do not install the unit where it may hinder the  
function of safety devices such as an airbag.  
Doing so may prevent the airbag from functioning  
properly in the event of an accident.  
• The installation and use suggestions contained in  
this manual are subject to any restrictions or  
limitations that may be imposed by applicable  
law—the purchaser should check applicable law for  
any restrictions or limitations before installing and/  
or operating this unit.  
WARNING:  
Do not operate the unit in a way that might divert your  
attention from driving safely. As a driver, you alone  
are responsible for safely operating your vehicle in  
accordance with traffic safety laws at all times.  
WARNINGS:  
• Failure to follow these safety instructions and  
warnings may result in a serious accident.  
• Store the battery in a place where children cannot  
reach. If a child accidentally swallows the battery,  
consult a doctor immediately.  
4
 
Box Contents  
Do not recharge, short, disassemble, or heat the battery  
or dispose of it in a fire. Doing any of these things may  
cause the battery to give off heat, crack, or start a fire.  
After you unpack your JVC PnP, make sure every-  
thing here is included:  
• Do not leave the battery with other metallic  
materials. Doing this may cause the battery to give  
off heat, crack, or start a fire.  
SIRIUS® Radio  
• When throwing away or saving the battery, wrap it  
in tape and insulate; otherwise, the battery may start  
to give off heat, crack, or start a fire.  
CAUTIONS:  
Take the following precautions to keep the unit in  
proper working order:  
Remote Controller  
Battery  
(CR2032)  
• Be sure the unit is connected to a 12 V DC power  
supply with a negative ground connection.  
• Do not install the unit where it will be exposed to  
high levels of humidity, moisture, or dust.  
• When replacing a fuse, use only a new one with the  
proper rating. Using a fuse with the wrong rating  
may cause the unit to malfunction.  
(The battery has been  
installed when shipped  
from the factory.)  
If anything is missing or damaged, or if your JVC PnP  
fails to operate, notify your shipper immediately. It is  
recommended that you keep the original packaging in  
case you need to ship your JVC PnP in the future.  
To prevent a short circuit when replacing a fuse, first un-  
plug the cigarette lighter adapter from the cigarette lighter.  
• When drilling holes to mount the unit, make sure  
not to damage wiring or other systems.  
5
 
Installation: Preparation  
To use your JVC PnP in your car or at home, it is required to separately purchase either KS-K6012 Car Docking  
Kit or KS-K6013 Home Docking Kit.  
KS-K6012 includes...  
• Installations  
KS-K6013 includes...  
• Installations  
• Car Docking Cradle  
• Suction Cup Mount  
• Cigarette Lighter Adapter  
• Magnetic Roof-mount SIRIUS Antenna  
• Home Docking Cradle  
• SIRIUS Antenna  
• Power Supply  
• Audio Cord  
Note: KS-K6012 does not include any connecting  
cord; however, you can also use an optional audio  
cord or cassette adapter to send the signals to your car  
stereo.  
CAUTION:  
Do not put JVC PnP in the cradle until you have  
completed the installation unless it is required for  
testing.  
6
 
Installation in Your Car with KS-K6012  
CAUTION:  
Do not plug the cigarette lighter adapter into the cigarette lighter until you have completed the  
installation.  
2 Assemble the supplied suction cup mount to  
JVC PnP using the supplied screws.  
• When using other screws, use the screws of less  
than 8 mm (3/8 inch) long with a diameter of  
4 mm (3/16 inch).  
Installing in your car  
For more illustrated explanations, refer to the  
Installations supplied for your Car Docking Kit.  
1 Determine where you want to mount JVC PnP.  
• Do not install JVC PnP where it may obstruct  
your view through the windshield or your view  
of your car’s indicator displays.  
• Do not install JVC PnP where it will hinder your  
access to the car’s controls.  
• Do not install JVC PnP where it may hinder the  
function of safety devices such as an airbag.  
Doing so may prevent the airbag from  
functioning properly in the event of an accident.  
• Find a location that provides good visibility of  
and access to JVC PnP’s front panel.  
To be continued...  
7
 
Installation in Your Car with KS-K6012 (continued)  
Finding the Best Antenna Mounting  
Location  
3 Plug the cigarette lighter adapter into the back  
of the cradle—DC 12 V.  
4
Activate the FM signal transmitter and preset the  
frequency (see “4 FM Transmitter Options” on  
page 24).  
1 Temporarily plug the antenna into the back of  
the cradle—ANT. until it is firmly seated.  
• It is recommended to preset the same frequency  
into your car stereo as you have selected so you  
can easily tune in to the frequency.  
2 Find an antenna location on a metal surface of  
your car—at least 30 cm × 30 cm (12 inches ×  
12 inches), and at least 15 cm (6 inches) from a  
window.  
• The antenna’s powerful magnet will secure it to  
the metal surface.  
• Best reception is achieved with the antenna  
mounted on the roof or trunk for convertibles.  
• If your car has a roof rack or skid ribs, it may be  
necessary to mount the antenna off-center.  
Note: You can also connect a cassette adapter or  
an audio cord (both not supplied) to the AUDIO  
jack to send the signals to your car stereo.  
An optional hard-wired FM transmitter—FM  
Switching Box Assembly (Parts No. 112C3159) is  
available. By connecting this Assembly between  
the FM OUT terminal of the cradle and the  
antenna input terminal of your car stereo, you can  
obtain stable and reliable transmission/reception.  
3 Temporarily plug the cigarette lighter adapter  
into the cigarette lighter.  
4 Slide JVC PnP all the way into the cradle so  
that the connector at the bottom of the unit  
makes proper contact in the cradle.  
8
 
Running the Antenna Cable  
Before routing the antenna cable, confirm that the  
antenna is mounted in a good location.  
5 Slide the locking knob  
into lock position  
on the back of the cradle.  
1 Press the (POWER) button to turn off your  
6 Press the (POWER) button to turn on your  
JVC PnP.  
JVC PnP.  
2 Slide the locking knob  
• If your JVC PnP has been properly connected  
and the antenna is receiving the SIRIUS signal,  
you will hear audio.  
into unlock position.  
• If your JVC PnP has not been properly  
connected, “Antenna Error” will appear on the  
display of your JVC PnP.  
Re-orient the antenna until you hear audio (see  
8 Antenna Aiming” on page 27).  
– Make sure your car is not in garage, or  
somewhere the satellite signal could be  
blocked.  
3 Remove your JVC PnP from the cradle.  
4 Unplug the cigarette lighter adapter from the  
cigarette lighter and the antenna from the  
cradle.  
To be continued...  
9
 
Installation in Your Car with KS-K6012 (continued)  
5 Route the cable from the antenna into the  
trunk by tucking it underneath the rubber  
molding around rear window.  
7 Plug the antenna into the back of the cradle—  
ANT. until it is firmly secured.  
• Route the cable from the lowest point of the rear 8 Plug the cigarette lighter adapter into the  
window. Take advantage of any existing cable  
channels or wiring conduits.  
cigarette lighter.  
• For SUVs, minivans & 5-door vehicles, bring  
the cable into the car under the rubber molding  
for the tailgate, and continue under the interior  
trim.  
9 Attach the SIRIUS antenna to the metal  
surface of the car, such as roof of your car.  
6 From the trunk, route the cable around the  
passenger compartment and to the back of the  
cradle.  
CAUTION:  
• Do not pull the cable across sharp edges that  
could damage it.  
• Do not route the cable nearby areas where it  
could become tangled in driver’s and  
passenger’s feet.  
Note: It is strongly recommended to unplug the  
cigarette lighter adapter after you turn off the car  
ignition.  
10  
 
Installation in a Home with KS-K6013  
Installation in a Home  
SIRIUS Satellite map  
For more illustrated explanations, refer to the  
Installations supplied for your Home Docking Kit.  
Due to the paths of SIRIUS satellites over the US, the  
best location for the antenna in your home depends on  
where you live. Use the map below as a general  
placement guideline.  
Area 1 : Place the antenna at an EAST-facing  
window.  
Area 2 : Place the antenna OUTSIDE, away from any  
overhead obstructions.  
Area 3 : Place the antenna at a WEST-facing window.  
Area 4 : Place the antenna at a NORTH- or EAST-  
facing window.  
1 Plug the audio cord’s mini connector into the  
back of the cradle—AUDIO.  
2 Plug the audio cord’s white (L ch) and red (R  
ch) connectors into your audio system.  
3 Plug the power supply into the back of the  
cradle—DC 12V.  
4 Plug the antenna into the back of the cradle—  
ANT. until it is firmly seated.  
Area 5 : Place the antenna at a NORTH-facing  
window.  
Area 6 : Place the antenna at a WEST- or NORTH-  
facing window.  
5 Place the included antenna near a window.  
• Use the map on the next column as a general  
placement guideline—some experimentation  
may be needed to obtain the best results.  
1
2
3
You can also use FM signal transmitter to output  
the sound of JVC PnP to your FM tuner. When  
you use this function, see “4 FM Transmitter  
Options” on page 24.  
4
5
6
N
S
W
E
11  
 
JVC PnP’s Controls and Features  
SIRIUS® Radio  
Remote controller  
POWER  
MUTE  
2
q
CH  
+
1
CAT  
+
CAT  
-
SELECT  
5 6  
CH  
-
3
4
MEMO  
DISP  
5
CH  
BAND  
MENU  
5
8
7
2
CAT  
CAT  
3
CH  
6
7
8
2
3
4
1
4
2
5
8
0
3
6
SEL  
9
p
DISP  
MEMO  
BAND  
MENU  
P.TunE  
S - S E E K  
7
9
PREV  
DIRECT  
3
1
2
5
9
w
e
4
6
12  
 
1 Main display  
8 MENU  
Enters and exits from the Menu Options settings.  
2
(POWER)  
9 Number keys 1 6 (0 9)  
Enters the stream numbers (0 – 9) or preset  
numbers (1 – 6) directly.  
Turns on and off the power.  
3 MEMO (memory) (S-SEEK)  
Stores and recalls the Artist/Song Title  
information.  
p DIRECT  
Enables access to streams directly by number keys.  
q MUTE  
Mutes sounds.  
w PREV (previous)  
Returns to previous stream or previous status.  
e Insulation sheet  
4 BAND (P.TUNE)  
Selects the 3 bands of stream presets; enters and  
exits from the Preset Tuning Mode.  
5 CH (channel) 5 / (CH + / ),  
CAT (category) 2 / 3 (CAT / +)  
Navigate through streams, categories, and Menu  
screens.  
When you use the remote controller for the first  
time, pull out this sheet.  
6 SEL (SELECT)  
• On the menu and stream list screens: Selects an  
item highlighted.  
Replacing the battery in the Remote Controller  
• On the Normal Operation or Preset Tuning Mode  
screens: Only on the main unit—returns to the  
previous stream if pressed and held. Also enables  
access to streams directly by number keys.  
7 DISP (display)  
1. While pushing the lock lever (1),  
pull out the battery holder (2).  
Lithium coin battery  
(CR2032)  
2. Replace the new battery on the  
battery holder with the + side  
facing up.  
Changes text size of the artist name and song title  
if pressed. Also alternates the Normal Operation  
screen and the Stream List if pressed and held.  
1
3. Insert the battery holder back into  
position.  
2
13  
 
3. Press MENU to enter the Menu Options settings.  
4. Press 5 (CH + on the remote controller) or  
(CH –) until “Sirius ID” is highlighted, then  
press SEL (SELECT).  
Activating your SIRIUS Subscription  
Before you can listen to JVC PnP, you must subscribe  
to SIRIUS Satellite Radio’s service.  
Now your unit’s unique 12-digit SIRIUS ID  
Number appears on the display.  
• This SIRIUS ID number is also printed on your  
JVC PnP packaging.  
1. Make sure that JVC PnP is properly connected and  
that its antenna is oriented to receive the SIRIUS  
satellite signal (see Installation sections for details).  
• Write the number down and have your credit card  
handy.  
5. Contact SIRIUS on the Internet at <http://  
activate.siriusradio.com/>.  
• Follow the prompts to activate your subscription.  
You can also call SIRIUS toll-free at 1-888-539-  
SIRIUS (7474).  
2. Press (POWER) to turn on your JVC PnP.  
After displaying the SIRIUS logo, JVC PnP  
updates all Sirius channels. “UPDATING  
STREAMS” appears on the top line and “X%  
Completed” (0%-20%-40%-60%-80%-100%)  
appears on the bottom line as the updating goes on.  
Note: Do not press any button or perform any  
operation until updating has been completed.  
Removing your JVC PnP from the docking  
cradle  
Once all updated SIRIUS channel streams are  
received, “Call 1-888-539-SIRIUS to Subscribe”  
appears on the display and JVC PnP now tunes in to  
the SIRIUS Satellite Radio’s Preview Channel  
(Ch184).  
Slide the locking knob into  
unlock position on the back of  
the cradle and gently slide  
JVC PnP out of the cradle.  
You cannot tune in to any other channels until  
you activate your SIRIUS subscription.  
14  
 
Basic Operation  
After you have successfully activated your SIRIUS subscription, the Normal Operation screen will appear:  
Press CH 5 / (or CH + / on the remote controller) to select streams.  
The selected stream will automatically play, and the name and artist of the currently playing song will scroll  
across the display.  
If you want to listen to a different entertainment category...  
1. Press CAT 3 / 2 (or CAT + / on the remote  
controller) once to activate the Category Selection  
screen.  
2. Press CAT 3 / 2 (or CAT + / on the remote  
controller) repeatedly to scroll through music and  
entertainment categories.  
Category Selection screen  
3. When the category you want is highlighted, press  
CH 5 / (or CH + / ) to highlight the stream you  
want to hear, then press SEL (or SELECT on the  
remote controller).  
The display returns to the Normal Operation screen  
for that stream.  
To go back to the previously selected stream,  
press and hold SEL on the main unit, or press  
PREV (previous) on the remote controller.  
Normal Operation screen  
To turn off the power, press  
(POWER).  
15  
 
Selecting Music by Artist (Artist List)  
1. Press and hold DISP (display) for about 2 seconds  
while in the Normal Operation mode.  
To cancel the operation, press and hold DISP  
(display) again.  
Selecting Music  
Your JVC PnP has three ways to search for and select  
music: by stream, by artist, and by song.  
Selecting Music by Stream (Stream List)  
1. Press and hold DISP (display) for about 2 seconds  
while in the Normal Operation mode.  
The Stream List screen (below) appears, showing  
all available streams regardless of category.  
To cancel the operation, press and hold DISP  
(display) again.  
2. Press DISP (display) once again.  
The Artist List screen (below) will appear, showing  
all currently playing artists regardless of category.  
If composer information is available for a stream,  
it will be displayed along with the artist name.  
3. Press CH 5 / (or CH + / ) repeatedly to select  
an artist, then press SEL (or SELECT).  
2. Press CH 5 / (or CH + / ) repeatedly to select a  
stream, then press SEL (or SELECT).  
The display returns to the Normal Operation screen  
for that stream.  
The display returns to the Normal Operation screen  
for that stream.  
If you stop on a stream, it will play without  
pressing SEL (or SELECT).  
16  
 
Selecting Music by Song Title (Song Title List)  
1. Press and hold DISP (display) for about 2 seconds  
while in the Normal Operation mode.  
To cancel the operation, press and hold DISP  
(display) again.  
Direct Tuning  
Streams can also be directly accessed.  
1. Press DIRECT on the remote controller.  
2. Press DISP (display) twice again.  
The Song Title List screen (below) appears,  
showing all currently playing songs regardless of  
category.  
3. Press CH 5 / (or CH + / ) repeatedly to select a  
song, then press SEL (or SELECT).  
2. Press the number keys 0 9 on the remote  
controller to enter the desired stream number  
(3 digits).  
Presetting the Desired Streams  
You can store up to 6 of your favorite streams into  
each of 3 bands (A, B, and C)total 18 streams.  
1. Press BAND to activate the preset band you want.  
The selected band is shown in the lower left corner  
of the Normal Operation screen.  
The display returns to the Normal Operation screen  
for that stream.  
2. Select the stream you want to preset (see Basic  
Operationon page 15 and Selecting Musicon  
the left page).  
To be continued...  
17  
 
3. Hold the number keys 1 6 you want to store the  
stream in for about 2 seconds.  
The selected preset number flashes and then  
remain lit on the display to show that it has been  
memorized.  
Searching for a Preset Stream  
You can search for a preset stream using the list.  
1. Press and hold BAND while in the Normal  
Operation mode.  
JVC PnP enters Preset Tuning mode.  
Each time you press and hold the button, the  
Normal Operation screen and the Preset Tuning  
Mode screen alternate.  
If the preset button already has a stream stored in  
it, it will be replaced with the new stream.  
Tuning into Stream Presets  
1. Press BAND to activate the preset band you want.  
The selected band is shown in the lower left corner  
of the Normal Operation screen.  
Normal Operation  
Preset Tuning mode  
2. Press and hold DISP (display) until the Preset  
Stream List screen appears.  
Normal Operation screen  
Preset Stream List  
2. Press the number keys 1 6.  
18  
 
3. Press DISP (display) repeatedly until the desired  
Preset Stream List screen appears.  
Each time you press the button, the Preset lists  
changes from Stream List, Artist List,then  
Song Title List.”  
Enlarging the IndicationsDisplay Button  
You can enlarge the artist name and song title shown  
on the Normal Operation screen or the Preset Tuning  
Mode screen.  
This feature is useful when viewing the display at a  
distance.  
Press DISP (display).  
The artist name and song title are enlarged and may  
start scrolling if it cannot be shown entirely at a time.  
Song Title List  
Artist List  
To resume the Normal Operation screen (or Preset  
Tuning Mode screen), press DISP (display) again.  
4. Press CH 5 / (or CH + / ) repeatedly to select  
your desired item, then press SEL (or SELECT).  
Notes:  
Pressing and holding DISP (display) will enter the  
Stream List mode (and exit from it).  
Pressing DISP (display) repeatedly while in the  
Stream List mode changes the list type—“Stream  
List, Artist List,and Song Title List.  
19  
 
If you have already stored the same PDT...  
JVC PnP checks the data already stored in memory,  
and compares with the newly selected PDT.  
If it has been already stored, no entry will be made  
newly to avoid duplication.  
S-Seek FunctionMemory Button  
You can store the current Program Definition Text  
(PDT: Artist Name and Song title) with a total of 20  
Artist/Song Title combinations, then by using the  
stored information, you can make your JVC PnP  
search the current incoming Sirius signal and alert you  
when a saved song is being playedS-Seek function.  
If you have already stored 20 PDTs...  
S-Seek Fullwill flash on the display for a while,  
then the Replace-Cancelscreen appears.  
To store the information  
While your JVC PnP is showing either of the  
following screens, press MEMO (memory).  
Normal Operation  
Preset Tuning mode  
1. Press CH 5 / (or CH + / ) to select either  
Replaceor Cancel, then press SEL (or  
SELECT).  
The current program data information is stored in  
memory.  
Replace: To select the information to be  
overwritten with the new Artist/Song Title.  
After pressing SEL (or SELECT), the following  
screen appears (on the next page).  
20  
 
Press CH 5 / (or CH + / ) to select  
unnecessary information (PDT), then press SEL  
(or SELECT).  
It will be replaced with the new information.  
Cancel: Not to store a new information.  
The original screen will be resumed.  
Then the S-Seek Alert List screen which displays  
the current matches appears.  
Press CH 5 / (or CH + / ) to select the Artist/  
Song Title on the S-Seek Alert List screen, then  
press SEL (or SELECT).  
Note: If no operation is done for about 10  
seconds, JVC PnP automatically exits from the  
S-Seek Alert List screen.  
How S-Seek function works  
Each time JVC PnP is turned on, it automatically  
searches the incoming signal to determine if a match  
exists between the signal and the PDTs stored in  
memory (except the ones with S-Seekset to Off:  
see the next page).  
To delete or deactivate the PDT for S-Seek  
1. Press and hold MEMO for about 3 seconds.  
The most newly stored information appears on the  
display.  
If one or more matches are found, S-Seek Alert”  
appears for a while, and a beep tone sounds.  
Play of the current selection will continue until a  
new selection is made.  
To be continued...  
21  
 
2. Press CH 5 / (or CH + / ) repeatedly to select  
an unnecessary PDT, then press SEL (or SELECT).  
The following screen appears.  
S-Seek: To deactivate the PDT for S-Seek  
function  
After pressing SEL (or SELECT), the S-Seek  
Setting screen appears.  
Select Off(to deactivate the PDT for S-Seek)  
or On(to activate the PDT for S-Seek) by  
using CH 5 / (or CH + / ) then SEL (or  
SELECT).  
Menu Options Settings  
The following options are available on the Menu  
Options screen—  
3. Press CH 5 / (or CH + / ) to select either  
Deleteor S-Seek, then press SEL (or  
SELECT).  
Delete: To delete an unnecessary PDT.  
After pressing SEL (or SELECT), the Delete  
Confirmation screen appears.  
1 Sirius ID  
2 Display Settings  
3 Confirm Tone Options  
4 FM Transmitter Options  
5 Add or Skip  
6 Lock Options  
7 Audio Level Options  
8 Antenna Aiming  
Select Yes(to delete) or No(to cancel  
deletion) by using CH 5 / (or CH + / ) then  
SEL (or SELECT).  
9 Memory Options  
0 Time Based Features  
- Factory Default  
22  
 
Basic Setting Procedure  
1 Sirius ID  
1. Press MENU.  
The Menu Options List screen appears on the  
display.  
Displays your 12 digit Sirius ID number. No  
adjustments are allowed in this mode.  
2. Press CH 5 / (or CH + / ) repeatedly to select  
an desired item, then press SEL (or SELECT).  
The selected Option Setting screen appears.  
3. Set the Option Setting as you like following the  
instruction described in each section that follows.  
To exit from this option, press MENU or SEL (or  
SELECT).  
To exit from this mode, press MENU as many times  
as required.  
2 Display Settings  
The following adjustments are possible on this sub-  
menu screen—  
Note: If no operation is done for about 10  
seconds, JVC PnP automatically exits from the  
Menu Options screen.  
Contrast Control  
Dimming Control  
Font Type  
Contrast Control: A horizontal bar graph is  
displayed. Press CAT 3 / 2 (or CAT + / ) to adjust  
the contrast, then press SEL (or SELECT).  
You can also use CH 5 / (or CH + / ) for  
adjustment.  
23  
 
Dimming Control: Press CH 5 / (or CH + / –) to  
select either “Manual” or “Automatic”, then press  
SEL (or SELECT).  
Manual: A horizontal bar graph is displayed. Press  
CAT 3 / 2 (or CAT + / ) to adjust the display  
brightness manually, then press SEL (or SELECT).  
(You can also use CH 5 / (or CH + / –) for  
adjustment.)  
3 Confirm Tone Options  
Press CH 5 / (or CH + / –) to select either “On” or  
Off”, then press SEL (or SELECT).  
On: To activate the confirmation beep when you  
press  
(POWER) or some operation buttons.  
Off: To deactivate the confirmation beep.  
4 FM Transmitter Options  
This option functions only when your JVC PnP is  
connected to the Car Docking Kit KS-K6012.  
Automatic: The low dimming limit “L” and high  
dimming limit “H” will always maintain a  
minimum separation of the settings.  
– Adjust the low dimming limit “L” and high  
dimming limit “H” using CAT 3 / 2  
(or CAT + / ).  
The following settings are possible on this sub-menu  
screen—“FM On/Off” and “Frequency selection”.  
– Toggle between “L” and “H” using CH 5 / (or  
CH + / –).  
– Confirm all settings using SEL (or SELECT).  
FM On/Off: Press CH 5 / (or CH + / –) to select  
either “On” or “Off”, then press SEL (or SELECT).  
FM On: To activate the FM transmitter.  
FM Off: To deactivate the FM transmitter.  
Font Type: Press CH 5 / (or CH + / –) to select the  
font type shown on the display, then press SEL (or  
SELECT).  
Note: It is recommended that you select “FM Off”  
if you have connected your JVC PnP using a  
audio cord or cassette adapter.  
Frequency selection: Press CH 5 / (or CH + / –) to  
select an available frequency for the FM transmitter.  
24  
 
5 Add or Skip  
You can skip unwanted streams while tuning.  
Lock/Unlock  
Upon entering Lock/Unlockfor the first time, you  
are asked to enter the 4-digit code that is used to lock/  
unlock stream access.  
Upon entering this mode, a stream list appears with  
the currently playing stream highlighted.  
Press 1key four time to enter the default access  
code1111.  
Press CH 5 / (or CH + / ) to select a stream you  
want to skip then press SEL (or SELECT).  
Skipappears, next to the stream, on the screen.  
From the second entries into this mode, a stream list  
appears with the currently playing stream highlighted.  
To activated skipped stream again, repeat the same  
procedure and delete Skip.  
Press CH 5 / (or CH + / ) to select a stream you  
want to lock, then press SEL (or SELECT).  
Lockappears, next to the stream, on the screen.  
Note: Skipped streams can be accessed by  
entering the stream number directly using the  
number keys.  
6 Lock Options  
You can prohibit access to the particular streams.  
When you try to tune in to these prohibited streams,  
your JVC PnP asks you to enter the access code.  
To activated locked stream again, repeat the same  
procedure and delete Lock.  
Note: Locked streams can be accessed by entering  
the stream number directly using the number keys.  
25  
 
Edit Code  
7 Audio Level Options  
You can adjust the audio level and gain at the same  
time when you feel that the sound through your JVC  
PnP is too small or too loud.  
You can change the access code (default code1111)  
as you like.  
Upon entering this mode, a horizontal bar graph is  
displayed.  
Press CAT 3 / 2 (or CAT + / ) to adjust the audio  
level and gain, then press SEL (or SELECT).  
You can also use CH 5 / (or CH + / ) for  
adjustment.  
1. Upon entering this mode, press the number keys  
1 6 to enter the current access code (4-digit:  
default code1111).  
The New Codescreen appears.  
2. Press the number keys 1 6 to enter your new  
access code (4 digit).  
The confirmation screen appears.  
3. Press the number keys 1 6 to enter your new  
access code (4 digit) again.  
The access code is now changed.  
Note:  
Limit acceptable lock code digits to 1 6.  
26  
 
9 Memory Options  
8 Antenna Aiming  
You can activate or deactivate S-Seek Function. In  
addition, you can delete all stored PDT (see page 21)  
at a time.  
This is required to be adjusted only when you use  
your JVC PnP at home.  
You can ensure optimum reception when locating the  
SIRIUS antenna.  
The following adjustments are possible on this sub-  
menu screen—“Automatic Memory Searchand  
Clear All Memory.  
Upon entering this mode, two horizontal bar graphs  
are displayed.  
The satellite signal strength level is displayed on the  
SAT graph while the terrestrial signal strength level is  
displayed on the TER graph. The current reception  
levels are shown on the graphs.  
Automatic Memory Search: Press CH 5 / (or CH  
+ / ) to select either Onor Off, then press SEL  
(or SELECT).  
On: To activate the S-Seek Function.  
Off: To deactivate the S-Seek Function.  
Move the antenna location so that the level indication  
on the bar graph moves as close to the right end as  
possible.  
Clear All Memory: Press CH 5 / (or CH + / ) to  
select either Yesor No, then press SEL (or  
SELECT).  
To exit this option, press MENU or SEL (or SELECT).  
Yes: To erase all stored PDTs.  
No: To cancel the erasure.  
Note: Terrestrial repeaters are typically used in  
large urban areas where satellite signal reception  
is not stable.  
Terrestrial signals (TER) may not be available in  
your residential area.  
27  
 
Time Zone:  
0 Time Based Features  
Press CH 5 / (or CH + / ) to select your  
residential area from one of the following time zone,  
then press SEL (or SELECT).  
The following adjustments are possible on this sub-  
menu screen—  
Clock  
(GMT 9:00) Alaska  
(GMT 8:00) Pacific  
(GMT 7:00) Mountain  
(GMT 6:00) Central  
Alarm Clock  
Program Alert  
Auto Shutdown  
Sleep Mode  
(GMT 5:00) Eastern  
(GMT 4:00) Atlantic  
(GMT 3:30) Newfndlnd (Newfoundland)  
Clock  
When entering this menu option, you can set up the  
clock shown on the display.  
Daylight Savings Time (DST) Observance:  
Activate this function if your area is subject to DST.  
Press CH 5 / (or CH + / ) to select either DST  
Observed (default)or DST Not Observed, then  
press SEL (or SELECT).  
The clock data is provided via the SIRIUS Satellite  
stream, and will be updated automatically.  
Format:  
Press CH 5 / (or CH + / ) to select either  
12 Hour (default)or 24 Hoursystem, then press  
SEL (or SELECT).  
28  
 
Alarm Clock  
You can set your JVC PnP to turn on at a specific  
time.  
Program Alert  
You can program your JVC PnP to switch to a  
specified stream at a specified time.  
The last selected stream prior to shutdown will be  
played when the Alarm turns on your JVC PnP.  
To use your programmed setting, make sure to  
set Program Alertto Program Alert On.  
The following settings are possible on this sub-menu  
screen—  
Program Time/Day (default12:00pm/Monday)  
Stream (defaultCurrently Playing Stream)  
Program Alert On/Off (defaultOff)  
Set Alarm:  
Press CH 5 / (or CH + / ) to select either Alarm  
Onor Alarm Off (default), then press SEL (or  
SELECT).  
Alarm Time (default12:00pm):  
Press CAT 3 / 2 (or CAT + / ) to set the hour, press  
CH 5 / (or CH + / ) to set the minute, then press  
SEL (or SELECT).  
AM or PM will switch automatically as you advance  
the time.  
Program Time/Day:  
Press CH 5 / (or CH + / ) to select either Time”  
or Day, then press SEL (or SELECT).  
Time: To set the time.  
Press CAT 3 / 2 (or CAT + / ) to set the hour,  
then press CH 5 / (or CH + / ) to set the  
minute, then press SEL (or SELECT).  
AM or PM will switch automatically as you  
advance the time.  
Note: If your JVC PnP cannot receive the SIRIUS  
signals (satellite and terrestrial) correctly when the  
alarm time comes, you may hear a series of alarm  
tones.  
Day: To set the day.  
Press CH 5 / (or CH + / ) to select the day—  
Monday, Tuesday, Wednesday, Thursday, Friday,  
Saturday or Sunday, then press SEL (or SELECT).  
Make sure to set both Timeand Daycorrectly.  
29  
 
Stream:  
Sleep Mode  
Press CH 5 / (or CH + / ) to select a stream on the  
stream list shown on the screen, press SEL (or SELECT).  
You can specify the time until your JVC PnP shuts  
off—“Sleep Off, 15 Minutes, 30 Minutes, 45  
Minutesand 60 Minutes.  
Program Alert On/Off:  
Press CH 5 / (or CH + / ) to select the time, then  
press SEL (or SELECT).  
Your JVC PnP will now turn off after the selected  
time has passed.  
Press CH 5 / (or CH + / ) to select either  
Program Alert Onor Program Alert Off, press  
SEL (or SELECT).  
If Sleep Offis selected, Sleep Mode is canceled.  
Auto Shutdown  
You can make your JVC PnP shut off automatically if  
no operation is done for about one hour.  
A beep tone sounds just one minute before your JVC  
PnP shuts off, and the Cancel Auto Shutdown”  
screen will be shown (see note below).  
- Factory Default  
You can reset the following items to the default  
settings.  
Press CH 5 / (or CH + / ) to select Yes(to  
reset) or No(to cancel the reset), then press SEL (or  
SELECT).  
To activate (or deactivate) Auto Shutdown  
Press CH 5 / (or CH + / ) to select Enabled(or  
Disabled), then press SEL (or SELECT).  
Note: When the Cancel Auto Shutdownscreen is  
shown on the display, pressing SEL (or SELECT)  
will temporarily cancels Auto Shutdown.  
30  
 
Contrast Control50%  
Dimming ControlAutomatic  
FM On/OffFM On  
Frequency selection91.3MHz  
Output Level70%  
Auto Memory SearchOn  
Clock: Format12 Hour  
Troubleshooting  
Your JVC PnP does not turn on.  
] The fuse is blown.  
] Power is not supplied properly. Check the power  
cable connection.  
No sound can be heard.  
] Audio cord or cassette adapter is not correctly  
connected.  
Clock: Time ZoneEastern  
Clock: Daylight Savings TimeDST Observed  
All preset streams and stored PDTs are also erased,  
and all skipped streams becomes unskipped (locked  
streams remain locked).  
Antenna Errorappears on the display.  
] Antenna is not connected firmly.  
Call 1-888-539-SIRIUS to Subscribeappears on  
the display.  
] SIRIUS subscription has not been made.  
Specifications  
Invalid Channelappears on the display.  
] Stream tuned is invalid. Select a different stream.  
Audio Output: 650 mV RMS Maximum  
(10 k)  
Fuse: 3A Slow Blow  
Power Supply: 10 V 16V, Negative Ground, DC  
Dimensions (W/H/D):  
68 mm × 110 mm × 28 mm  
(2 11/16 inches × 4 3/8 inches × 1 1/8 inches)  
31  
 
.jvcmobile.com  
Visit us on-line for  
Technical Support & Customer Satisfaction Survey.  
US RESIDENTS ONLY  
Having TROUBLE with operation?  
USA ONLY  
Call 1-800-252-5722  
We can help you!  
EN  
© 2004 Victor Company of Japan, Limited  
 
0704MNMMDWKRI  

Insignia Car Speaker NS S5250 User Manual
Insignia Fan NS F12R6 22 User Manual
Insignia Flat Panel Television NSL46Q12010A User Manual
Insignia Two Way Radio NS F1112 User Manual
Integra Headphones RDC 71 User Manual
iRobot Vacuum Cleaner 74520 User Manual
ISEKI Swimming Pool OL 5450 10 User Manual
JL Audio Car Speaker SB T 4RNR2 10W3v2 User Manual
JVC Car Stereo System GET0054 001A User Manual
JVC DVD VCR Combo HR XVC32SUJ User Manual